SoC camera

Several minor driver improvements, no real functionality changes.

Julia Lawall (1):
drivers/media/platform/soc_camera/pxa_camera.c: use devm_ functions

Laurent Pinchart (2):
sh_vou: Use video_drvdata()
sh_vou: Use vou_dev instead of vou_file wherever possible

Two driver fixes:

Guennadi Liakhovetski (2):
sh-mobile-ceu-camera: fix SHARPNESS control default
mt9t112: mt9t111 format set up differs from mt9t112

Several updates and fixes for the 3.9 series, including - after a long battle - the removal of i.MX25 support from the mx2_camera driver, it now only supports i.MX27.

Fabio Estevam (1):
mx2_camera: Convert it to platform driver

Guennadi Liakhovetski (5):
soc-camera: properly fix camera probing races
soc-camera: fix repeated regulator requesting
soc-camera: remove struct soc_camera_device::video_lock
soc-camera: split struct soc_camera_link into host and subdevice parts
soc-camera: use devm_kzalloc in subdevice drivers

Javier Martin (3):
mx2_camera: Remove i.mx25 support.
mx2_camera: Remove 'buf_cleanup' callback.
mx2_camera: Remove buffer states.

Several commits ended up not making it into the V4L tree from my previous pull requests, so, they are repeated here. Additionally a long overdue soc-camera documentation update, several managed resource allocation optimisations, other minor updates.

Guennadi Liakhovetski (9):
media: mem2mem: make reference to struct m2m_ops in the core const
media: add a VEU MEM2MEM format conversion and scaling driver
media: soc-camera: use managed devm_regulator_bulk_get()
media: sh-mobile-ceu-camera: runtime PM suspending doesn't have to be synchronous
media: soc-camera: update documentation
media: soc-camera: remove superfluous JPEG checking
media: sh_mobile_csi2: use managed memory and resource allocations
media: sh_mobile_ceu_camera: use managed memory and resource allocations
MAINTAINERS: add entries for sh_veu and sh_vou V4L2 drivers

Javier Martin (1):
media: mx2_camera: Add image size HW limits.

Several fixes, which, however, somehow ended up being delayed a lot:

Anatolij Gustschin (1):
soc_camera: fix VIDIOC_S_CROP ioctl

Cyril Roelandt (1):
mx2_camera: use GFP_ATOMIC under spin lock.

Guennadi Liakhovetski (1):
media: sh-vou: fix compiler warnings

One new (not soc-camera) driver for a mem2mem video processing device, one driver (mx1_camera) declared broken, several driver updates.

Anatolij Gustschin (4):
V4L: soc_camera: allow reading from video device if supported
mt9v022: add v4l2 controls for blanking
mt9v022: support required register settings in snapshot mode
mt9v022: set y_skip_top field to zero as default

Frank SchÀfer (1):
ov2640: add support for V4L2_MBUS_FMT_YUYV8_2X8, V4L2_MBUS_FMT_RGB565_2X8_BE

Guennadi Liakhovetski (1):
media: add a VEU MEM2MEM format conversion and scaling driver

Shawn Guo (1):
media: mx1_camera: mark the driver BROKEN

Mostly compiler warning fixes for 3.7 after the struct v4l2_ioctl_ops::vidioc_s_crop prototype change, additionally a V4L2 control implementation fix for mt9v022

Anatolij Gustschin (1):
mt9v022: fix the V4L2_CID_EXPOSURE control

Guennadi Liakhovetski (7):
media: sh_vou: fix const cropping related warnings
media: sh_mobile_ceu_camera: fix const cropping related warnings
media: pxa_camera: fix const cropping related warnings
media: mx3_camera: fix const cropping related warnings
media: mx2_camera: fix const cropping related warnings
media: mx1_camera: use the default .set_crop() implementation
media: omap1_camera: fix const cropping related warnings

A last minute 3.6 fixes pull request has been sent, but, unfortunately, hasn't managed it in before the release, they will have to be pushed to 3.6-stable:

Frank Schäfer (1):
ov2640: select sensor register bank before applying h/v-flip settings

Peter Senna Tschudin (2):
drivers/media/video/mx2_camera.c: fix error return code
drivers/media/video/soc_camera.c: fix error return code

A couple of improvement patches for 3.7:

Javier Martin (1):
media: mx2_camera: Don't modify non volatile parameters in try_fmt.

Sachin Kamat (2):
soc_camera: Use module_platform_driver macro
soc_camera: Use devm_kzalloc function

Sylwester Nawrocki (1):
soc-camera: Use new selection target definitions

These are some additional patches for 3.7, some of them also went to 3.6-fixes earlier.

Albert Wang (1):
media: soc_camera: don't clear pix->sizeimage in JPEG mode

Alex Gershgorin (2):
media: mx3_camera: buf_init() add buffer state check
mt9v022: Add support for mt9v024

Javier Martin (1):
media: mx2_camera: Fix clock handling for i.MX27.

Liu Ying (1):
media: mx3_camera: Improve data bus width check code for probe

Several fixes for the 3.6 kernel have been pushed upstream, some of them were on the 3.6 pull request, but haven't been applied back then.

Albert Wang (1):
media: soc_camera: don't clear pix->sizeimage in JPEG mode

Alex Gershgorin (1):
media: mx3_camera: buf_init() add buffer state check

Fabio Estevam (2):
video: mx1_camera: Use clk_prepare_enable/clk_disable_unprepare
video: mx2_camera: Use clk_prepare_enable/clk_disable_unprepare

Javier Martin (1):
media: mx2_camera: Fix clock handling for i.MX27.

Of the soc-camera 3.6 kernel patches, listed below, the series from Laurent is a part of his work to use soc-camera originated subdevice (e.g. camera sensor) drivers with non-soc-camera bridge (camera host) drivers, like the OMAP3 ISP driver.

Fabio Estevam (2):
video: mx1_camera: Use clk_prepare_enable/clk_disable_unprepare
video: mx2_camera: Use clk_prepare_enable/clk_disable_unprepare

Guennadi Liakhovetski (1):
V4L: soc-camera: add selection API host operations

Javier Martin (2):
media: mx2_camera: Fix mbus format handling
media: mx2_camera: Add YUYV output format.

Laurent Pinchart (18):
soc-camera: Don't fail at module init time if no device is present
soc-camera: Pass the physical device to the power operation
ov2640: Don't access the device in the g_mbus_fmt operation
ov772x: Don't access the device in the g_mbus_fmt operation
tw9910: Don't access the device in the g_mbus_fmt operation
soc_camera: Don't call .s_power() during probe
soc-camera: Continue the power off sequence if one of the steps fails
soc-camera: Add and use soc_camera_power_[on|off]() helper functions
soc-camera: Push probe-time power management to drivers
ov772x: Fix memory leak in probe error path
ov772x: Select the default format at probe time
ov772x: Don't fail in s_fmt if the requested format isn't supported
ov772x: try_fmt must not default to the current format
ov772x: Make to_ov772x convert from v4l2_subdev to ov772x_priv
ov772x: Add ov772x_read() and ov772x_write() functions
ov772x: Add support for SBGGR10 format
ov772x: Compute window size registers at runtime
ov772x: Stop sensor readout right after reset

Unfortunately, not all these patches managed it into 3.6, some have been delayed until 3.7.

Soc-camera / V4L update for the 3.5 kernel includes a user-provided line stride support from Laurent Pinchart and various driver updates:

Guennadi Liakhovetski (5):
V4L: soc-camera: (cosmetic) use a more explicit name for a host handler
V4L: mx2-camera: avoid overflowing 32-bits
V4L: soc-camera: switch to using the existing .enum_framesizes()
V4L: sh_mobile_ceu_camera: don't fail TRY_FMT
V4L: marvell-ccic: (cosmetic) remove redundant variable assignment

Kuninori Morimoto (1):
V4L2: sh_mobile_ceu: manage lower 8bit bus

Laurent Pinchart (10):
mx2_camera: Fix sizeimage computation in try_fmt()
soc_camera: Use soc_camera_device::sizeimage to compute buffer sizes
soc_camera: Use soc_camera_device::bytesperline to compute line sizes
soc-camera: Add plane layout information to struct soc_mbus_pixelfmt
soc-camera: Fix bytes per line computation for planar formats
soc-camera: Add soc_mbus_image_size
soc-camera: Honor user-requested bytesperline and sizeimage
mx2_camera: Use soc_mbus_image_size() instead of manual computation
soc-camera: Support user-configurable line stride
sh_mobile_ceu_camera: Support user-configurable line stride

Masahiro Nakai (1):
V4L2: mt9t112: fixup JPEG initialization workaround

Two pull requests have been submitted for soc-camera for the 3.4 kernel. They include multiple updates to the mx2_camera driver, including its conversion to the videobuf2 API, several other driver updates. Besides, client device power-on order has been changed, affecting all soc-camera set ups:

Fabio Estevam (3):
media: video: mx2_camera.c: Provide error message if clk_get fails
media: video: mx2_camera.c: Remove unneeded dev_dbg
video: Kconfig: Select VIDEOBUF2_DMA_CONTIG for VIDEO_MX2

Javier Martin (10):
media i.MX27 camera: migrate driver to videobuf2
media i.MX27 camera: add start_stream and stop_stream callbacks.
media i.MX27 camera: improve discard buffer handling.
media i.MX27 camera: handle overflows properly.
media: i.MX27 camera: Use list_first_entry() whenever possible.
media: i.MX27 camera: Use spin_lock() inside the IRQ handler.
media: i.MX27 camera: return IRQ_NONE if no IRQ status bit is set.
media: i.MX27 camera: fix compilation warning.
media: i.MX27 camera: more efficient discard buffer handling.
media: i.MX27 camera: Add resizing support.

Guennadi Liakhovetski (2):
V4L: soc-camera: call soc_camera_power_on() after adding the client to the host
V4L: sh_mobile_ceu_camera: maximum image size depends on the hardware version

Philipp Zabel (1):
V4L: pxa_camera: add clk_prepare/clk_unprepare calls

Sascha Hauer (1):
V4L: mx2_camera: remove unsupported i.MX27 DMA mode, make EMMA mandatory

Happy new year:-) This pull contains a single fix for the atmel-isi driver:

Josh Wu (1):
V4L: atmel-isi: add clk_prepare()/clk_unprepare() functions